Posts Tagged ‘Clayton’

Is Your Home More Valuable with Energy Efficient Appliances? A Question From Fairburn

Friday, September 16th, 2011

It’s impressive the things people do to improve the value of their Fairburn home. We’re talking about crown molding, new floors, new siding, upgrades to the landscaping and much more. The cost of upgrading these things can grow out of hand quickly and if the boost to your home’s value isn’t equally exponential, it’s hard to justify the expense.

So, it’s always nice to find a simple upgrade that can be performed for a few hundred dollars that will save you money immediately and improve the value of your home in the future. Your appliances are one such upgrade.

The Value of Energy Efficiency

An energy efficient washing machine can save upwards of $150 per year on water costs. An energy efficient toilet cuts consumption by as much as 150%. Low flow shower heads cut water costs by one third to one half and your heating and air conditioning systems can be improved by 10-35% depending on the upgrades available to you.

When you add up all those savings, the result is a tremendous amount of money that can be saved each year on everything from your water bill to your cooling needs. Imagine what happens when someone looks to buy your home. They see that there are all new appliances with energy efficient ratings that will save them money.

It’s not just lower bills; it’s a decrease in upfront investment. On the surface, it’s unlikely that your energy efficient appliances will directly increase the value of your home, but they can increase the likelihood of someone paying what you’re asking for the home. They add value to the livability of the home, if not the property itself and in today’s housing market, that’s a major plus.

Best Upgrades

The best upgrades to your home’s appliances are the ones that save money without additional work. Major upgrades to your heating and cooling are good if you need an upgrade anyway or you plan on staying in your home for a few years.

Tags: , , , ,
Posted in Energy Savings | Comments Off

How to Avoid Mold Spores: A Tip From Big Canoe

Monday, September 12th, 2011

Mold is one of the single worst problems you can face as a homeowner in Big Canoe. So, how do you prevent it from appearing in the first place? Here are a few tips to help reduce the risk of mold growth and infestation in your home.

Moisture

The very first thing you should do is get rid of excess moisture in your home. Mold needs moisture to grow, so by denying it that moisture you severely reduce your mold risk. Dry your bathroom after showers, install a dehumidifier for the basement and check humidity levels in the summer for excess moisture in the air. If there are damp areas of your house that you have trouble controlling, make sure you don’t store anything there. Avoid placing boxes, clothing or anything else that could harbor mold on concrete floors or in crawlspace areas where dampness could occur.

Ventilation and Heat

If you have a finished basement, make sure it is heated properly to avoid excess moisture build up. Cool spaces in the basement can result in high levels of humidity which in turn result in mold growth. Additionally, ventilation is key throughout your house, especially if you have a moisture problem. Get fans and open windows if necessary, but keep air moving to help dry and keep dry those spaces.

Air Filtration

Having a forced air system for air conditioning or heating can result in moisture build up in your ductwork along with allergens that lead to mold growth. To avoid potential mold spores, make sure you install an air cleaner to supplement the forced air system. Get a good air filter will have a MERV rating of at least 8, although 11 is better when you are trying to avoid any potential allergy issues. Whole house air cleaners are an ideal solution here as they will capture all of the particles floating around your house.

Tags: , , , , ,
Posted in Indoor Air Quality | Comments Off

Mechanical or Forced Ventilation vs. Natural Ventilation

Monday, May 30th, 2011

Just about everyone can agree that effective ventilation is essential to maintaining a healthy indoor living environment. But exactly what does this entail? There are quite a few ways to circulate air throughout your home, and each method is appropriate for a specific situation.

Benefits of Natural Ventilation

Natural ventilation, of course, can be achieved simply by opening a window. But there’s actually a lot more to it than that. If you really want to ventilate your home through natural means, then you’ll have to learn to take advantage of the differences in pressure in different areas of your home.

One way to do this is to use cross ventilation. This means opening windows or doors on both sides of your home and allowing the outdoor air to blow through, carrying stale, indoor air out the other side. A more sophisticated version of this is stack ventilation.

In a two-story home, stack ventilation can be achieved by opening the windows on the bottom floor on one side of the house and on the top floor on the opposite side. Because of the differences in outdoor air pressure, air will be sucked in through the lower floor windows and out through the upper ones.

Why Natural Ventilation Is Not Always Practical

These types of natural ventilation can be extremely effective when it comes to both cooling an indoor environment and removing indoor air contaminants. Unfortunately, allowing outdoor air inside unimpeded allows outdoor contaminants easily as well.

On particularly hot or humid days, natural ventilation can’t reduce the indoor temperature enough to make it comfortable indoors. While a light breeze is enough to take the edge off on a moderate spring or summer day, more is needed when the weather is extreme.

Types of Mechanical Ventilation

When you think of mechanical ventilation, you probably jump right to large central air conditioning systems. But that’s certainly not the only type of effective mechanical ventilation available. In fact, mechanical ventilation can be performed by just about any type of fan on the market, and while operating a fan is certainly more expensive than opening a window, it’s still much more affordable than running an air conditioner all day long. Fans can also be used in combination with natural ventilation to achieve better results than either system could on its own.

Tags: , , ,
Posted in Air Conditioning | Comments Off

What to Do Before Turning on AC For First Time

Friday, May 27th, 2011

The weather is starting to heat up and you are eager to flip the switch on your air conditioning system for the first time. It’s been sitting there since spring, waiting to be used, but now you wonder if there are any tasks that should be completed before its first use. Depending on the type of system you had installed there are a few things you should keep in mind before you cool down your house. They include:

  • Outdoor Cleaning – First, make sure the outdoor unit (if you have a central AC system) is cleaned up nicely. Clear away any leaves, remove the cover and check the system for any growth or debris that might have gotten under the cover. Check the air supply registers to make sure they are open and either replace or clean your filters depending on whether they are permanent or disposable.
  • Check Your Thermostat – The thermostat should be checked before you start using the system. To do this, set the system to Auto-cool and then lower the thermostat setting to one degree lower than the actual temperature in the room. If the system turns on, the thermostat is working properly. Let it run for a few hours to make sure this stays consistent.
  • Clear Away Winter and Spring Dust – Now that your system is running, make sure you check the filters for any buildup of dust that was in the ductwork. Over the off season, your ducts might develop a layer of dust and debris, especially if your heating system doesn’t make use of them. The filters might clog quickly as a result.
  • Check for Water Leaks – Your condensate overflow drain should work properly as well – check for any potential leaks during the first 48 hours of operation. Even a small leak should be checked immediately to avoid potential problems as summer cooling season kicks in.

If you notice any problems other than those listed above, you should call a service professional immediately. Ideally you will have your system inspected in early-mid spring to ensure it is ready for the summer, but even so problems can develop between inspection and first running. Electrical issues especially should be checked immediately.

Tags: , , ,
Posted in Air Conditioning | Comments Off

How a Thermostat Works

Wednesday, April 6th, 2011

Your thermostat is designed to closely monitor and maintain the temperature in your home. When you flip the switch, you want your furnace or air conditioner to respond immediately. So, it’s a good idea to learn how it works so that if there is a problem, not only will you know better what needs to be fixed – you can decide whether to call a professional in for help.

Thermostats shouldn’t need input from you other than to set the initial temperature. From there, they are automatic switches. A thermometer inside the thermostat measures the indoor air temperature. When it gets above or below the limit you’ve specified, it triggers the thermostat to send a message to your home comfort system and keep things nice and comfortable.

Types of Thermostat

Thermostats come in two forms –electromechanical and electronic. An electromechanical thermostat is the simplest and has been used for decades to regulate temperature in homes. It has a simple strip or coil of metal that expands as the temperature rises and contract as it lowers. A mercury thermometer is placed on top of the strip. The coil’s movements cause the vial to tip as the temperature changes. There is a pair of electrical contacts on either end of the vial. The mercury can absorb that electrical current when the electrical contacts touch the thermometer. The mercury then acts as a switch to turn on your comfort system.

An electronic thermostat simply has an electronic sensor that measures the indoor air temperature. You set a temperature for your room and when it changes significantly, the switch inside your electronic thermostat is triggered, causing it to turn on your comfort system.

Ways to Upgrade Your Thermostat

Most homes only need the bare minimum in their thermostats. However, there is some very exciting technology on the market these days that can add quite a bit of value to your system. Not only can you install a programmable thermostat, you can opt for zone control systems that allow multiple thermostats in different rooms of your home.

Programming allows you to set temperatures for certain times of the day. This is especially great if you are gone from the house for long periods of time each day. Why heat or cool a home when it is empty? And if you have multiple people with different temperature needs, zone control temperature control allows you to set specific temperatures for specific rooms in your home – a very enticing option for large families or multi-story homes.

Tags: , , , ,
Posted in Indoor Air Quality | Comments Off

What Is a Water Source Heat Pump?

Friday, March 25th, 2011

A water source heat pump operates much like a traditional air source heat pump except that it extracts and dissipates heat by way of water instead of air. This is certainly not a type of home comfort system that will be available to anyone, but if you live in an area close to a well, lake or other natural water source, it may be an option worth considering.

All types of heat pumps can provide excellent year round home temperature control by pumping heat in during the winter months and removing it during the summer. The main difference between the types of heat pumps is where they get the heat or dispose of it.

Traditional air source heat pumps get their heat from the air outside, as even relatively cold air actually contains a substantial amount of heat. They use this heat to keep your house warm in the winter, but as the outside temperatures go down below freezing, these heat pumps can become less and less effective.

Water source heat pumps, on the other hand, work on basically the same principle as air source heat pumps, but they extract heat from a body of water rather than the air. They do this by cycling water through a system of pipes that is laid out at the bottom of a body of water. As the water cycles through, it gathers heat from the lake or reservoir and then carries it back to your house.

In the summer, the process is reversed and heat is carried out of your house and expelled in the cooler water outside. Like air source heat pumps, water source heat pumps are slightly more efficient at cooling rather than heating, as even deep water will eventually get cold during the winter months. However, the water is still often warmer than the air, and so water source heat pumps can be a good alternative if you live in a slightly cooler climate.

Of course, you do also need to have access to an appropriate body of water to have a water source heat pump installed, which makes it something that is not available to everyone. But if you do live near such a body of water, a water source heat pump is definitely something worth considering.

Tags: , , , ,
Posted in Heating | Comments Off